Rebirth Rebirth Expansion
Diablo Expansion: The Rebirth
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Problemi molto gravi al pc

 
Post new topic   Reply to topic    Rebirth Expansion Forum Index -> Tristram Voices
View previous topic :: View next topic  
Author Message
LABiRi
Master Of The Rebirth


Joined: 22 Nov 2005
Posts: 786
Location: Roma

PostPosted: Sat Jul 01, 2006 6:28 pm    Post subject: Problemi molto gravi al pc Reply with quote

Dopo aver ripreso il pc dall'assistenza, ancora mi da una marea di problemi e non riesco a tenerlo acceso piu' di una decina di minuti.
Dovrei cambiare ram e qualche pezzo del pc ma attualmente ho solo 10 euro in tasca e nient'altro, quindi non so quando potro' tornare a lavorare al rex e fare altre cose.
Volevo avvertirvi in quanto gia' alcuni si sono chiesti che fine ho fatto...spero di trovare al piu' presto una soluzione, anche se ho paura che non potro' fare molto se il problema risiede nei pezzi costosi da cambiare.

Vi terro' aggiornati Cry
_________________
Back to top
View user's profile Send private message Send e-mail MSN Messenger
DarKilleR
Disciple


Joined: 29 Jun 2006
Posts: 43

PostPosted: Sat Jul 01, 2006 7:48 pm    Post subject: (No subject) Reply with quote

Labiri...se posso ti do volentieri una mano per risolvere i tuoi problemi...

Però mi devi postare nel dettaglio i componenti del tuo PC...

e i problemi che hai...può essere qualcosa che è legato al calore.

P.S. in caso ci si becca pure su ICQ se hai la possibilità.
Back to top
View user's profile Send private message
LABiRi
Master Of The Rebirth


Joined: 22 Nov 2005
Posts: 786
Location: Roma

PostPosted: Sat Jul 01, 2006 8:07 pm    Post subject: (No subject) Reply with quote

Avevo pensato anche io al calore, ma sembra tutto nella norma (o almeno, leggendo su vari forum dicono che per i Sempron AMD la temperatura di circa 50° centigradi è accettabile).
Ho parecchie schermate blu, ogni volta con un motivo diverso. Una dice IRQL NOT LESS OR EQUAL, le altre invece sono addirittura senza motivo (dicono "il computer è stato arrestato per evitare danni").
Oppure ancora, si congela tutto senza errori o avvisi, e ne video ne mouse ne tastiera ne hard disk rispondono piu.

Ho un sempron 2800+, 256 ram ddr, ati radeon 128mb, motherboard k7s5a,alimentatore bello potente comprato da qualche mese...1 HD da 80 giga, 1 da 30 e uno esterno da 250. Tastiera e mouse ps2.
Non so che altro inventarmi, manco quello del negozio sapeva che fare...ho paura sia la memoria, è l'unica cosa che mi viene in mente MaPorc
_________________
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Silmaril
Disciple


Joined: 21 Jun 2006
Posts: 29
Location: Biella

PostPosted: Sun Jul 02, 2006 12:03 am    Post subject: (No subject) Reply with quote

Se può darti una mano,
http://www.windowserver.it/forum/topic.asp?TOPIC_ID=657&SearchTerms=,irql,less,or,not,equal
da quanto ho capito è un problema legato ad un pezzo hw che da le bizze,
percaso hai inserito qualche pezzo ultimamente ? i problemi quando sono incominciati a saltare fuori ? e in che modo ?

magari si riesce a sistemare il problema o.O
_________________
Back to top
View user's profile Send private message MSN Messenger
zedzank
Guest





PostPosted: Sun Jul 02, 2006 11:31 am    Post subject: (No subject) Reply with quote

Avevo un problema del genere sul mio pc ho aggiunto una ventolina al processore e ora va bene
Back to top
LABiRi
Master Of The Rebirth


Joined: 22 Nov 2005
Posts: 786
Location: Roma

PostPosted: Sun Jul 02, 2006 2:25 pm    Post subject: (No subject) Reply with quote

Allora, ieri ho avuto un'altra BSoD (schermata blu della morte) con identificativo 0x0000D1, parametri 0xffffff,0x00002,0x0000,0xffffff, oltre ai vari congelamenti dell'intero sistema.
Dal sito della Microsoft:
Error Message: STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL - CAUSE wrote:

Parameters
1 - memory that is referenced
2 - IRQL
3 - value 0 = read operation, 1 = write operation
4 - address that referenced memory


Error Message: STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL - CAUSE wrote:

This issue can occur when the Driver Verifier feature is enabled and a driver has used an improper address. Note that the driver that is causing this issue may be listed in the error message.


Quindi ho provato a cercare informazioni sull' IRQ 02, e a quanto pare fa da ponte per gli IRQ che vanno da 8 a 15, e sembra sia legato alle schede isa, pero le informazioni sono poche e contraddicenti.

Ho notato inoltre che appena acceso, per un po' di tempo non da problemi: ho pensato potesse essere un problema di temperatura, cosi' ho aperto il case e lo sto lasciando bello arieggiato, e fin'ora non ho avuto freeze o cose varie..ma non è ancora detto.
Ho anche paura sia un problema di ram....
Continuero' a fare dei test.
_________________
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Malek
Dungeon Explorer


Joined: 01 May 2006
Posts: 119

PostPosted: Sun Jul 02, 2006 4:58 pm    Post subject: (No subject) Reply with quote

la memoria la puoi testare... se non erro sul sito MS puoi scaricare un programmino che poi eseguito da floppy ti testa le simm... a me successe na cosa simile un'anno fa... ho cambiato le simm ed è andato tutto a posto.
Back to top
View user's profile Send private message
pippowizzy
Dungeon Explorer


Joined: 16 May 2006
Posts: 113
Location: Taranto

PostPosted: Sun Jul 02, 2006 5:52 pm    Post subject: (No subject) Reply with quote

<img src=" border="0" /> spiacente labbo... non ti posso aiutare... vorrei ma non capisco nulla di quei messaggini li... Triste
_________________
Back to top
View user's profile Send private message Send e-mail MSN Messenger
DarKilleR
Disciple


Joined: 29 Jun 2006
Posts: 43

PostPosted: Sun Jul 02, 2006 9:37 pm    Post subject: (No subject) Reply with quote

prova a scaricarti memtest 86 l'eseguibile da DOS, e tramite floppy ti fa un test approfondito per vedere se è colpa della ram o no...il test dura circa 40 minuti.

Per vedere se è il calore, visto che la CPU in fin dei conti non è troppo calda, può essere il chip della main board che scalda, prova a tenere case aperto con ventilatore a lato e fare dei test pesi come S&M, che ti garantisce il massimo sforzo di tutto il sistema.

In caso di test negativi....credo che la soluzione sia un bel format C: ^_^ MaPorc
Back to top
View user's profile Send private message
Sj3
Right-hand man of The Rebirth


Joined: 12 Dec 2005
Posts: 168
Location: Sj3@diablorebirth.net

PostPosted: Sun Jul 02, 2006 10:31 pm    Post subject: (No subject) Reply with quote

DarKilleR wrote:

Per vedere se è il calore, visto che la CPU in fin dei conti non è troppo calda, può essere il chip della main board che scalda, prova a tenere case aperto con ventilatore a lato e fare dei test pesi come S&M, che ti garantisce il massimo sforzo di tutto il sistema.

In caso di test negativi....credo che la soluzione sia un bel format C: ^_^ MaPorc

Ha gia formattato e fatto la prova ventilatore da me suggerita GhGh
Ma ancora non è sicuro di nulla, dategli tempo, egli è pur sempre il Labbo.
_________________


Ehm...Look
Back to top
View user's profile Send private message MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Rebirth Expansion Forum Index -> Tristram Voices All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You cannot download files in this forum


Powered by phpBB © 2001, 2002 phpBB Group